Intermediate · 85 minutes
Advanced Glassblowing — Glass Pipes Volume 2
Study inside-out glass, side-car bubblers and downstem sinking with Mufasa in this 85-minute borosilicate glassblowing lesson.
$29 USDExplore lesson →
Original studio instruction · Advanced
Making Borosilicate Water Pipes — Volume 1
Study a large-scale borosilicate water pipe worked from top to bottom at the torch, with no lathe.
96-minute full lessonEnglish · Online videoLifetime streaming access
A three-minute preview from the original lesson.
The full lesson is approximately 96 minutes. Watch on the dedicated preview page
Skills to study
What you’ll learn
- Follow the progression of a large-scale water-pipe build.
- Study hand-blown construction without a glass lathe.
- Observe heat management across a more ambitious glass form.
Before you begin
Is this the right next step?
For experienced lampworkers with a suitable torch, kiln and studio. Comfort with larger tubing and multi-section work is needed before practicing a project at this scale.
Practice requires an oxygen-fuel torch, compatible borosilicate glass, suitable tools, an annealing kiln and a properly planned work area. See the equipment guide, studio guide and boro eye protection guide.
Inside the full lesson
What the lesson covers
A topic overview of the original instructional video.
01
Scaling up
See how a larger piece is approached at the torch.
02
Hand-blown construction
Study the working sequence without a lathe.
03
The complete form
Follow heavily worked glass from the developing build to the finished piece.
From the original series
At the artist’s workbench
A studio artist demonstrates the large-scale construction in the original Humboldt Films series.
Study the original glassworking demonstrations, pause at a difficult step, then return to the sequence as your own skills develop.
Read about Boro Mastery and the original series →
For current equipment operation and material requirements, use the relevant manufacturer’s instructions alongside the original studio lesson.
Read alongside this lesson
Course questions
Before you press play
Who is this lesson for?
Advanced lampworkers. For experienced lampworkers with a suitable torch, kiln and studio. Comfort with larger tubing and multi-section work is needed before practicing a project at this scale.
How long is the full lesson?
The full lesson runs approximately 96 minutes. The video on this page is a free preview.
How much does it cost?
Making Borosilicate Water Pipes — Volume 1 costs $59 USD as an individual lesson. Check Gumroad checkout for any applicable taxes.
How do I access the full lesson?
Purchase through the Gumroad link on this page, then follow the access link in your receipt to stream the lesson in your browser. Full-video downloads are disabled.
Is there a subscription?
No. This is a one-time purchase with lifetime streaming access and no recurring subscription.
Continue learning
Explore another lesson
Intermediate · 60 minutes
Making Sherlock Pipes — Volume 1
Follow a two-piece bubbler Sherlock build, including color preparation and latticino pulling with a cordless drill.
$39 USDExplore lesson →
Foundation · 55 minutes
Making Borosilicate Glass Jars — Volume 1
Learn vessel-forming and wall control through borosilicate glass jars, with latticino, ribbon latticino and color work.
$29 USDExplore lesson →