Advanced · 89 minutes
Making Sherlock Pipes — Volume 2
Watch Brian from Heaven’s Glass build a five-piece opposing-spiral Sherlock with dichroic glass, mallard and cobalt blue.
$59 USDExplore lesson →
Original studio instruction · Intermediate
Making Sherlock Pipes — Volume 1
Follow a two-piece bubbler Sherlock build, including color preparation and latticino pulling with a cordless drill.
60-minute full lessonEnglish · Online videoLifetime streaming access
A three-minute preview from the original lesson.
The full lesson is approximately 60 minutes. Watch on the dedicated preview page
Skills to study
What you’ll learn
- Follow the construction of a two-piece bubbler Sherlock.
- Study color preparation before joining the main sections.
- See how a cordless drill is used to pull color and latticino.
Before you begin
Is this the right next step?
For artists comfortable with basic borosilicate tubing work. Practice rotation, wall control and simple joins before attempting a multi-section bubbler.
Practice requires an oxygen-fuel torch, compatible borosilicate glass, suitable tools, an annealing kiln and a properly planned work area. See the equipment guide, studio guide and boro eye protection guide.
Inside the full lesson
What the lesson covers
A topic overview of the original instructional video.
01
Color preparation
Prepare color and patterned elements before working on the main form.
02
Latticino pulling
Study the use of a cordless drill for pulling color and latticino.
03
The Sherlock form
Follow the relationship between the bubbler body, stem and curved profile.
From the original series
At the artist’s workbench
An artist demonstrates the build at the torch in the original Humboldt Films studio series.
Study the original glassworking demonstrations, pause at a difficult step, then return to the sequence as your own skills develop.
Read about Boro Mastery and the original series →
For current equipment operation and material requirements, use the relevant manufacturer’s instructions alongside the original studio lesson.
Read alongside this lesson
Course questions
Before you press play
Who is this lesson for?
Intermediate lampworkers. For artists comfortable with basic borosilicate tubing work. Practice rotation, wall control and simple joins before attempting a multi-section bubbler.
How long is the full lesson?
The full lesson runs approximately 60 minutes. The video on this page is a free preview.
How much does it cost?
Making Sherlock Pipes — Volume 1 costs $39 USD as an individual lesson. Check Gumroad checkout for any applicable taxes.
How do I access the full lesson?
Purchase through the Gumroad link on this page, then follow the access link in your receipt to stream the lesson in your browser. Full-video downloads are disabled.
Is there a subscription?
No. This is a one-time purchase with lifetime streaming access and no recurring subscription.
Continue learning
Explore another lesson
Advanced · 96 minutes
Making Borosilicate Water Pipes — Volume 1
Study a large-scale borosilicate water pipe worked from top to bottom at the torch, with no lathe.
$59 USDExplore lesson →
Foundation · 55 minutes
Making Borosilicate Glass Jars — Volume 1
Learn vessel-forming and wall control through borosilicate glass jars, with latticino, ribbon latticino and color work.
$29 USDExplore lesson →